Tool Panels
Maximise the utility of your workbench...
In detail
The clip-on tool panels provide the perfect accessory to maximise the utility of our workbenches. With an array of 9.2 mm square holes on a 38.1 mm pitch, the panels accommodate Bott tool hangers which we selected based on their widespread use in industry. Their extensive range includes single and double hooks, spanner racks, Allen key holders, drill holders, etc. The tool panel assembly comes in 3 parts, with a choice of two sizes depending on how you want to configure the workbench storage. The steel parts are finished in a highly durable powder coat paint applied over an iron phosphate pre-treatment for maximum corrosion protection.
Specification
|
|
*To minimise the footprint of the bench, it is designed to be placed close to a secure wall and this limits the rearward length of the stabilisers. Do not place the free-standing bench where independent rearward support is not present, as toppling backwards could occur if the user pushes unintentionally beyond the normal upright position.
**For the bolt-down version, the concrete must be to grade C20/25-C50/60 non-cracked unreinforced and reinforced. The required fasteners are supplied with the bench.
**For the bolt-down version, the concrete must be to grade C20/25-C50/60 non-cracked unreinforced and reinforced. The required fasteners are supplied with the bench.